The most common CorGal tanks are available with inverted or funnel type roof systems. These tanks are often used to capture rain that falls directly onto the tank roof or to contain water that may be directed to the tank from a gutter, downspout or other water conductor pipe.

A safety structure and debris filter is installed at the low point of the inverted roof CorGal tank. The safety structure will prevent a small child from falling into the tank. The debris filter will keep leaves, trash and animals from entering the water storage area of the tank.

The inverted roof consists of multiple galvanized steel roof panels that are bolted together with a flat seam.

Water Tank With Inverted Roof

INVERTED ROOF TANK SIZES BY DIAMETER

MODELDIAMETEREAVE HTGALLONS
0601-WT-INVR6′3’8”500
0602-WT-INVR6′7’3”1,200
0603-WT-INVR6′10’9”1,900
0604-WT-INVR6′14’4”2,700
0605-WT-INVR6′17’11”3,400
0606-WT-INVR6′21’5”4,200
0801-WT-INVR8′3’8”800
0802-WT-INVR8′7’3”2,100
0803-WT-INVR8′10’9”3,400
0804-WT-INVR8′14’4”4,800
0805-WT-INVR8′17’11”6,100
0806-WT-INVR8′21’5”7,400
0901-WT-INVR9′3’8”900
0902-WT-INVR9′7’3”2,600
0903-WT-INVR9′10’9”4,300
0904-WT-INVR9′14’4”6,000
0905-WT-INVR9′17’11”7,700
0906-WT-INVR9′21’5”9,400
MODELDIAMETEREAVE HTGALLONS
1201-WT-INVR12′3’8”1,500
1202-WT-INVR12′7’3”4,500
1203-WT-INVR12′10’9”9,000
1204-WT-INVR12′14’4”10,500
1205-WT-INVR12′17’11”13,700
1206-WT-INVR12′21’5”16,500
1501-WT-INVR15′3’8”2,000
1502-WT-INVR15′7’3”6,700
1503-WT-INVR15′10’9”11,300
1504-WT-INVR15′14’4”16,100
1505-WT-INVR15′17’11”20,800
1506-WT-INVR15′21’5”25,500
1801-WT-INVR18′3’8”2,300
1802-WT-INVR18′7’3”9,700
1803-WT-INVR18′10’9”15,800
1804-WT-INVR18′14’4”22,300
1805-WT-INVR18′17’11”29,300
1806-WT-INVR18′21’5”37,300

Looking for a larger diameter water storage tank with an inverted roof?

Contact us for more information.

All capacities are rounded.  Actual tank capacities will vary due to location of flanges and structural design.